Wpc2030

1) Typically the WPC2030 controller should be setup and connected by your Wenzel installation technician. However, if a new PC is supplied, it is useful to know exactly how to hook up the controller to the PC. 2) The WPC controller requires a minimum of 3 available serial COM ports.

On the next tab, the Wenzel WPC2030 RS232 Settings Tab: a. Select the proper COM port for the WPC Controller. b. This COM port will be the first port available after the motherboard COM ports are accounted for. In this example, the motherboard uses Com1 and COM2, so the HT400 uses COM3.

2) The WPC controller requires a minimum of 3 available serial COM ports. If a PH10 is required, a 4th COM port is needed. 3) Wenzel supplies a PCI 4 port COM card with each machine to account for the COM ports.